6" Mincon Bit Series
| Mincon MC61 | |||
|
Minimum Hole Size: | 6" | 152mm |
| Number of Splines: | 12 | ||
| Height of Foot Valve Above Strike Face: | n/a | n/a | |
| Length of Shank: | 7.441" | 189.0mm | |
| Running Surface Diameter | n/a | n/a | |
| Mincon DTH Hammer | MC60, MC65 | ||
| Compatible Hammers | |||
| n/a | |||
| Click Here for More Info | |||
| Sandvik SD6 / 5315 | |||
|
Minimum Hole Size: | 6" | 152mm |
| Number of Splines: | 8 | ||
| Height of Foot Valve Above Strike Face: | 2.130" | 54.1mm | |
| Length of Shank: | 12.756" | 324mm | |
| Running Surface Diameter | 3.475" | 88.3 | |
| Mincon DTH Hammer | 6DHSD6 | ||
| Compatible Hammers | |||
| Sandvik SD6 | |||
| Bulroc Hyper 63-SD6 | |||
| Bucyrus (Halco) Dominator 600-M | |||
| Puma M6.2 SD6 | |||
| Click Here for More Info | |||
| Atlas Copco QL60 | |||
|
Minimum Hole Size: | 6" | 152mm |
| Number of Splines: | 12 | ||
| Height of Foot Valve Above Strike Face: | 2.325" | 59.1mm | |
| Length of Shank: | 9.972" | 253.3mm | |
| Running Surface Diameter | 3.611" | 91.7 | |
| Mincon DTH Hammer | 6DH, 6BH, XP60 | ||
| Compatible Hammers | |||
| Atlas Copco QL60, QL65, TD60, TD65 | |||
| Center Rock CR6-DW, CR60-W | |||
| NUMA Patriot 60WQ, DCS 6 | |||
| Bulroc Hyper 66/QL60 | |||
| Puma M6.2 QL6 | |||
| Click Here for More Info | |||
| Atlas Copco DHD360 | |||
|
Minimum Hole Size: | 6" | 152mm |
| Number of Splines: | 8 | ||
| Height of Foot Valve Above Strike Face: | 1.860" | 47.2mm | |
| Length of Shank (B): | 12.126" | 308mm | |
| Running Surface Diameter | 3.429" | 87.1 | |
| Mincon DTH Hammer | 6DH360 | ||
| Compatible Hammers | |||
| Atlas Copco DHD 360 STD | |||
| Numa Patriot 60W, Challenger 6 | |||
| Bucyrus (Halco) Dominator 600-IR | |||
| Bulroc Hyper 63, Hyper 66/DHD360 | |||
| Puma M6.2 DHD360 | |||
| Click Here for More Info | |||
