5" Mincon Bit Series
| Mincon MC51 | |||
|
Minimum Hole Size: | 5.375" | 136mm |
| Number of Splines: | 12 | ||
| Height of Foot Valve Above Strike Face: | n/a | n/a | |
| Length of Shank: | 7.007" | 178mm | |
| Running Surface Diameter | n/a | n/a | |
| Mincon DTH Hammer | MC55 | ||
| Compatible Hammers | |||
| n/a | |||
| Click Here for More Info | |||
| Atlas Copco QL 50 | |||
|
Minimum Hole Size: | 5" | 127mm |
| Number of Splines: | 12 | ||
| Height of Foot Valve Above Strike Face: | 2.100 | 53.3 | |
| Length of Shank: | 9.449" | 240mm | |
| Running Surface Diameter | 3.008" | 76.4mm | |
| Mincon DTH Hammer | MP55, 5DH-QL | ||
| Compatible Hammers | |||
| Atlas Copco QL50 | |||
| Center Rock CR50 | |||
| Puma 5.2 QL5 | |||
| Rockmore Roc 500-001 | |||
| Numa Patriot 50 | |||
| Click Here for More Info | |||
| Atlas Copco DHD 350R | |||
|
Minimum Hole Size: | 5" | 127mm |
| Number of Splines: | 8 | ||
| Height of Foot Valve Above Strike Face: | 2.600" | 66.0mm | |
| Length of Shank: | 10.276" | 261mm | |
| Running Surface Diameter | n/a | n/a | |
| Mincon DTH Hammer | 5DH | ||
| Compatible Hammers | |||
| Atlas Copco DHD 5 STD | |||
| Puma M5.2 DHD350 | |||
| Bucyrus (Halco) Dominator 500-IR | |||
| Bulroc Hyper 51 | |||
| Click Here for More Info | |||
| Sandvik SD5 /4315 | |||
|
Minimum Hole Size: | 5" | 127mm |
| Number of Splines: | 8 | ||
| Height of Foot Valve Above Strike Face | 2.140" | 54.4mm | |
| Length of Shank | 10.236" | 260mm | |
| Running Surface Diameter | n/a | n/a | |
| Mincon DTH Hammer | MP55SD5 | ||
| Compatible Hammers | |||
| Sanvik SD5 | |||
| Puma 5.2 SD5 | |||
| Bulroc Hyper 51-SD5 | |||
| Bucyrus (Halco) Dominator 500-M | |||
| Click Here for More Info | |||
