IMG 4292

South African deep-hole drilling expert Torque Africa Exploration (https://www.torqueafrica.co.za/) has set a new South African depth record for uninterrupted rotary percussion drilling at 1,402m, using a DTH hammer and drill bits supplied by Mincon.

Torque Africa Exploration first drilled its way into South African record books in 2017, with a 1,148-metre-deep hole for a mine waste rehabilitation project in Springs, east of Johannesburg, South Africa. At the time this was one of the deepest DTH holes in South Africa, with its near-1,150m depth tapering from a 22-inch diameter at the surface to just five inches at the bottom. Drilling for this project was completed in less than three months.

mc55

Despite the challenges associated with deep-level drilling, Torque Africa Exploration has allways pushed itself to go deeper, drawing on its extensive experience and making use of the best available equipment.

This was the case with their latest 1,402-metre-deep exploration borehole for a mining project in Beaufort West, in the Western Cape, South Africa. Not only is this one of the deepest drilled holes in the country, it is also a personal record for the team at Torque Africa.

In mid-June, earlier in 2018, the team started preparing for a specialised exploration drilling project in the Western Cape. Work commenced on 14 June 2018, with a South African-built Thor 8000 truck-mounted drill rig being used at the surface to drive the drill string. To power through the initial layers of clay and grey shale the drill team used an 8.5-inch solution – but progress wasn’t straightforward.

As the hole grew deeper, underground water influx added to complexity of the project and hampered progress. The team needed to push on and continue with their 24/7 drilling operation, which had reached the 582m mark in 11 days.

At this point Torque Africa Exploration turned to Mincon for assistance. A solution based on the Mincon MC55 hammer and drill bit combination was selected to complete the remainder of the project. Mincon’s MC55 hammer has a higher piston frequency and is specifically designed to cope with ingress of large amounts of water as well as increased backpressure at the base of the hole. This ensures maximum productivity in the most challenging ground conditions.

mc55bit r

During this last leg of drilling for the record-breaking hole, the Torque Africa team used Mincon equipment to drill the remaining 820m in just 14 days, reaching their record depth of 1,402m. Despite being nearly 1.5km into the earth’s crust, the drill string was successfully retracted and the entire project completed ahead of schedule.

Nardus Bezuidenhout, Director, Torque Africa, said:

“The initial plan was to reach a depth of 700m, but our client and other stakeholders requested us to continue drilling for geotechnical exploration. Thankfully, we have an experienced team that was able to complete the project well within the deadline.”

Bezuidenhout highlights that part of his team’s success was having access to reliable equipment and expert consultation from Mincon. For their record-setting hole in Beaufort West, the Mincon MC55 hammer proved to be the ideal choice; being specifically built for drilling applications where high penetration speeds are vitally important – a critical factor in this type of uninterrupted drilling project, as it saves on fuel costs.

“The Mincon MC55’s unique design provides greater impact energy and ultimate drilling performance for absolute maximum productivity in almost all ground conditions. Thanks to the quality of Mincon’s engineering we experienced no shanking, no deviation in the hole, and good air flow. The Mincon team also assisted with remarkable back-up service,” said Bezuidenhout.

torquethorrig2Torque Africa Exploration is one of South Africa’s most experienced specialist drilling contractors, boasting more than 20 years of experience in the industry. It remains at the forefront of drilling thanks to a dedicated, knowledgeable team that can adapt and meet clients’ needs – even within a changing scope.

“Customers are increasingly requesting deeper holes and Torque Africa will continue serving this market, while aiming to reach new record depths,” said Bezuidenhout.

For more information on the Mincon MC range of hammers and bits, visit the following product pages:

Alternatively, contact your region’s Mincon representative for advice on the best drilling solution for your requirements.